Royal Alpha 710ML страница 127 Скачать руководство пользователя | Manualshive

Страница: 127 / 134

background image

Alpha 710ML User’s Guide

120

Software Licensing Agreement

Trademark Notice

All trademarks, registered trademarks and service marks mentioned in this
manual and with this product are for identification purposes only and are
the property of their respective holders.

Copyright

© 2006 by Royal Consumer Information Products, Inc.

Software Licensing Agreement

TERMS. The product which you have purchased from Royal contains software (“the
Software”) which is owned by Royal and/or third parties which have provided the same
to Royal and which is protected by the United States copyright laws and treaty
provisions. By purchasing this product containing the Software, you are agreeing to be
bound by the terms of this license. If you do not agree to this license, you must not use
the product but rather immediately return it to your point of purchase for a full refund.
Any such return must be made within any applicable time period established for returns
at the point of purchase, but in no event later than 30 days after purchase. Your use of the
product shall be deemed acceptance of this license.

GRANT OF LICENSE. With the purchase of your product from Royal, Royal grants
you the right to use the Software, which is contained in the product. This grant is only for
the specific person, which has purchased the product. In other words, the license, which
accompanies each product, is only for one person.

RESTRICTIONS. You may not copy the Software, decompile it, duplicate it, modify it
or reverse engineer it in any fashion.

RIGHTS. The Software is provided to you in an “as is” condition by Royal. ROYAL
MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE SOFTWARE
AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR NON-INFRINGEMENT, ARE SPECIFICALLY DISCLAIMED. All
other rights with respect to the Software, except as set forth in this license, are specifically
retained by Royal or the owner of the Software. Nothing in this license constitutes a
waiver of any rights Royal or the owners of the Software may have under any applicable
copyright law or any other United States federal or state law.

GOVERNING LAW. This license is governed by the laws of the State of New Jersey.

«
...
125
126
127
128
129
...
»

Содержание Alpha 710ML







































































































































Отзывы:

Нет отзывов

Похожие инструкции для Alpha 710ML

Бренд: Pasport Страницы: 3

Бренд: Sam4s Страницы: 48

Бренд: Hengstler Страницы: 6

Бренд: Olympia Страницы: 17

Бренд: Nautilus Hyosung Страницы: 31

Бренд: Quick Страницы: 52

Бренд: ratiotec Страницы: 28

Бренд: Royal Страницы: 140

Бренд: Royal Sovereign Страницы: 10

Бренд: Royal Sovereign Страницы: 8

Бренд: Royal Sovereign Страницы: 12

Бренд: Royal Sovereign Страницы: 12

Бренд: Royal Sovereign Страницы: 12

Бренд: Royal Sovereign Страницы: 13

Бренд: Royal Sovereign Страницы: 12

Бренд: Royal Sovereign Страницы: 12

Бренд: Royal Sovereign Страницы: 12

Fast Sort FS-2D

Бренд: Royal Sovereign Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды