ANY QUESTIONS?
CONTACT ROYAL VENDORS’ CUSTOMER SERVICE DEPARTMENT
IN NORTH AMERICA, CALL TOLL FREE 1 800 931 9214
F0019003.FRM
REV.: C
ISSUE DATE: 05 JUNE 1995
REV. DATE: 05 DEC 2003
R
SUBJECT:
Installation of the RVV Card Reader Adapter Kit
MODELS:
RVV NG
Page: 2 of 2
Date: 17 Sept 09
Revision: 02
Figure 1.
Select panel decal or fascia
Remove the existing select panel decal
or fascia from the vender located in the
upper right corner area.
Figure 2.
Remove the four nuts that secure the
validator (two on each side).
Validator filler plate nut (4 nuts total)
Figure 3.
Validator adapter plate
11/32” nut
(9 mm)
Mount the validator adapter plate, as shown, and
secure it with the four 11/32" (9 mm) nuts.
Note: Some parts are removed in this illustration
for clarity.
287
426 Industrial Boulevard • Kearneysville WV 25430-2776 • USA
Telephone:
+1 304 728 7056 • [email protected]
Toll-free in North America:
1 800 931 9214 •
Fax:
+1 304 725 4016
Canada:
+1 905 738 5777 •
Mexico:
+52 55 5203 6887
Europe:
+49 2158 95 1000 •
Australia:
+61 2 9890 5433
SERVICE BULLETIN