RIM-HD-13SS
7
It is recommended to clean this unit after extensive usage. The water separator pipe and the water filters should be
cleaned periodically
In the event that the water separator pipe is blocked and no water is flowing down, turn OFF the unit. Disassemble this
water separator pipe and clean it. Clean each hole on the pipe wall as shown below.
After cleaning, re-install the water separator pipe ensuring the correct terminal of the pipe is connected securely to the
silicone pipe.
Clean both the water tank and the big water reservoir with diluted detergent, room temperature water and a soft cloth.
Use water to rinse the inside and drain out the water from the draining port by unplugging the drain cap on the
back. This will help ensure the unit and ice-cubes are good.
While cleaning the unit, in the event you notice ice cubes on the evaporator, you can turn on the unit to let the unit begin
making ice. Press “ON/OFF” button for more than 5 seconds to let the unit start to help melt the ice cubes.
