●
CONTINUOUS DRAIN OPTION
Connect the drain pipe to the back of the unit. The unit will continuously run
without the need of emptying the bucket.
1) Put the unit on level floor, unscrew the cap on the back of unit.
2) Connect a garden hose to the unit. Ensure that there are no kinks or knots in the garden hose.
3) Press "POWER" button to run the unit.
Garden Hose
Note:
Install the drain pipe follow below picture. If the drain pipe is not installed
correctly water will not drain from the pipe.
Correct
Incorrect
10
The patented heavy-duty pump system allows water removal of up to 16 Ft (4.9m) in height. If you want the water to flow directly to a drain, connect the condensation
discharge tube supplied to the connection pipe located on the lower front part of the unit. Select the dehumidifying function and press the PUMP button.
Note: With the condensation discharge hose missing and the pump switched ON, the PUMP symbol on the display will be blinking. The unit is not working. To correct
this problem:
• Check the hose is correctly positioned;
• Disconnect and reconnect the plug.
CONTINUOUS DRAINING USING AUTO PUMP
In the event frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost disappears. When the coils
are completely defrosted, the compressor will automatically restart .
AUTOMATIC DEFROST
