CONTROL PANEL AND OPERATION
(Continued)
WARNING: Before dusting or cleaning, turn the power switch off and disconnect the power cord from
the machine. It is very important to clean all the sensors in the machine with a soft brush to avoid any
paper particles or dust from sticking to the light transmitter or the light-receiver sensors. It is important
to clean the inside of the machine occasionally. Unplug the machine and lift the top cover to gain
access to the interior.
If necessary, the glass surfaces of the detectors may be wiped with a soft cloth damped with alcohol.
To get the best results out of your bill counter, Royal Sovereign recommends using Royal Sovereign
Cleaning Cards (RBC-CLN) to remove dirt, dust, oils, and other contaminates from bill counters. With
the machine on, simply run the cleaning card through the machine like a bill. (Note: You may need to
adjust the bill thickness adjuster as a cleaning card is thicker than a banknote. After using a cleaning
card, return the bill thickness adjuster to the previous setting). This cleaning card will run through and
clean the sensors of dirt and other contaminates. Cleaning cards are recommended to be used after
every 100 cycles.
MAINTENANCE OF THE MACHINE
PRINT:
Print function is used in Value Counting feature to allow you to print the totals that show in the
REPORT. To use print function, you will require a printer with RS-232 interface (not included).
Refer to your printers users manual and in the MENU option, set the BPS to correct the PRINTER
INTERFACE. Press and hold “PRINT” to print
12
