Royal Prestige Maxtractor Скачать руководство пользователя страница 12

23

22

TROUBLESHOOTING Q&A 

  When there is no power to the maXtractor™:

•  Check if the power cord is properly plugged in.
•  Check if the hopper and the juicing bowl are 

properly assembled.

•  Check if the top-set and the base are properly 

assembled.

•  MaXtractor™ will not operate if parts are not 

assembled properly. 

  Low juice yield:

•  Each ingredient has diff erent amounts of liquid 

that will yield diff erent amounts of juice.

•  If the ingredients are not fresh, they may contain 

reduced amounts of fl uid, which will yield less 
juice.

•  Check if the compression silicone is fi rmly 

inserted.

•  If the ingredient itself has low water content, it 

may help to soak it in water before juicing.

•  If juicing ingredients with small seeds, after a 

few servings, it may reduce the juice yield. For 
best results, disassemble and wash the top-set in 
between juicing.

•  If there is seed residue on the bottom of the 

strainer, this can aff ect maXtractor™ performance 
and the overall juice yield.

  There is too much pulp in the juice:

•  When continuously juicing, and depending on the 

ingredient, the juice may contain a lot of fi ne pulp. 

•  To reduce the fi ne pulp, clean the top-set 

frequently and extract the pulp. 

•  Use a mesh strainer and put the juice through it 

to collect the unwanted pulp. 

•  If the strainer and the UltraSqueezer™ are 

damaged and aff ecting the maXtractor™’s 
performance, it is recommended the parts be 
replaced.  

*The lifetime of each part may vary depending 
on length and method of use and ingredients 
extracted.

•  If too many ingredients are inserted at the same 

time, it may cause the maXtractor™ to stop 
frequently. This can lead to pulpy juice. Insert the 
ingredients slowly and few at a time.

  The hopper will not close:

•  Make sure the UltraSqueezer™ is pushed all the 

way in to the strainer in order for the hopper to 
close properly.

  Odd noise from the maXtractor™:

•  Check if the parts are assembled correctly. 

Try reassembling the parts and listen for the odd 
noise.

•  Do not start the maXtractor™ unless there are 

ingredients and/or liquid in it. 

•  Operating the maXtractor™ without ingredients 

can cause damage to the UltraSqueezer™.

•  The friction noise from the UltraSqueezer™ and 

the strainer will disappear when ingredients are 
inserted into the maXtractor™.

•  If the noise occurs when ingredients are inserted 

into the maXtractor™, check the size of the 
ingredients. Do not insert anything over 1 inch in 
thickness. 

•  Depending on the type of ingredients, the 

dimensions can be smaller. 

•  The noise can occur if the maXtractor™ is operated 

on an uneven or slanted surface. Place the 
maXtractor™ on a horizontally fl at surface when 
operating.

  The extracted pulp is very moist:

•  During the very beginning of extraction, the pulp 

can be more moist.

•  Depending on the ingredient’s condition,  

especially when the ingredient is not fresh, the 
juice can be extracted with the pulp.

•  Select fresh ingredients.

  During operation, the juicing bowl shakes.

•  The UltraSqueezer™ and the strainer are set up 

to crush and squeeze the ingredients. It is normal 
for the UltraSqueezer™ and the strainer to vibrate.

•  If the ingredient contains strong fi ber, the 

vibration from the top-set may be stronger. 

  During juicing, the maXtractor™ stopped:

•  Check the power cord and make sure it is plugged 

in correctly.

•  Check that all the parts are correctly assembled.
•  If too many ingredients are inserted at one time, 

this can cause the maXtractor™ to stop.

•  When the maXtractor™ stops because there are 

too many ingredients inserted in it, press the 
REVERSE - OFF - FORWARD button in this order, 
switching back and forth 2 to 3 times. 

•  The reverse setting will push the ingredients up, 

and the forward setting will pull the ingredients 
down.

•  If the maXtractor™ stops due to the overload 

protection, let it cool for 30 minutes to 2 hours 
before juicing again.

•  If there are hard seeds within the ingredients, 

remove them before juicing. Hard seeds can 
damage the maXtractor™.

  Layers of separation in the juice:

•  Depending on the density of the ingredients, 

the extracted juice may show layers of diff erent 
juices. It is diff erent from separation due to 
oxidation caused by juicing with a high-speed 
maXtractor™.

  The hopper is stuck: 

•  After juicing, let the maXtractor™ operate for 

another 30 seconds to extract the remaining 
pulp. 

•  If there is too much pulp in the top-set, this can 

cause the hopper to not open. In this situation, 
press the REVERSE OFF - FORWARD button in this 
order, switching back and forth 2 to 3 times.

•  Pour water down the hopper to rinse out the 

inside and then try opening the hopper.

  Juice dripping down the body of the base:

•  If the compression silicone on the bottom of the 

juicing bowl is not plugged in correctly, the juice 
may seep out on to the maXtractor™ base. Before 
assembling the parts, check and make sure the 
compression silicone is plugged in correctly.

  Is it possible to juice ingredients with  

 tough 

fi ber?

•  Ingredients like celery or ginger contain long 

fi bers that may wrap around the UltraSqueezer™ 
and aff ect the maXtractor™’s performance. When 
juicing fi brous ingredients, do not collect more 
than 0.5 liter of juice. After collecting this quantity 
or less, clean the top-set completely before 
juicing again.

  Discoloration of the plastic parts:

•  After juicing, if the maXtractor™ is not cleaned 

right away, the remaining pulp inside the top-
set can dry up which can make disassembling 
and cleaning hard. This can also aff ect the 
maXtractor™’s performance and color.

•  Ingredients that are rich in carotenoids such as 

carrots and spinach may dye plastic parts. When 
this occurs, rub vegetable oil in to the dyed areas 
and use mild detergent to clean.

•  Vegetable oil should only be used during clean-

up for parts that are discolored. Do not use 
vegetable oil on the UltraSqueezer™ or the 
strainer. If vegetable oil or animal fat gets on the 
UltraSqueezer™ or the strainer, this can aff ect the 
maXtractor™’s performance and may result in 
damaged parts.

•  The silicone pieces on the top-set can be 

detached to be thoroughly cleaned.

  Using for purposes other than juicing: 

•  This maXtractor™ is designed to juice ingredients 

like fruits and vegetables.

•  Do not use the maXtractor™ for extracting 

vegetable oil.

•  Do not juice ingredients with high contents of 

vegetable/ animal oil.

•  If vegetable/animal oil gets on the UltraSqueezer™ 

or the strainer, this can aff ect the performance 
of the maXtractor™ and could result in damaged 
parts.

Содержание Maxtractor



























Отзывы: