Royal Prestige FrescaPure 3000 Plus, Инструкция по использованию и уходу

Страница: 6 / 12

6
FRESCAPURE
®
9. If your kitchen faucet does not fit any of the Adapters
provided, send your threaded aerator to your Independent,
Royal Prestige Representative or to the Royal Prestige
Customer Service Department.
Include a note requesting
an adapter that fits your threaded aerator.
10. Determine which side of the sink you want your System:
To position System on the LEFT side of
your sink: Unthread Lid Assembly from
Filter Housing, then orient the Lid Assembly
to Filter Housing as shown.
(Fig 10A, Step 1)
Once positioned, thread Lid Assembly
clockwise onto the Filter Housing until
tightened.
(Fig. 10A, Step 2)
To position System on the RIGHT side of
your sink: Unthread Lid Assembly from
Filter Housing, then orient the Lid Assembly
to Filter Housing as shown.
(Fig 10B, Step 1)
Once positioned, thread Lid Assembly
clockwise onto the Filter Housing until
tightened.
(Fig. 10B, Step 2)
11. Press the elbow fitting on Diverter Valve Assembly
into the Filter Base.
12. With the System placed on the counter, position
Spout so that water will flow into kitchen sink. Turn
the cold water “ON” and rotate the Diverter Lever
90º up towards the front of the faucet. Water will
begin entering the Filter Housing. Check to see
that all hose, clamp and housing connections are
tight and do not leak.
13. When using your System for the first time, allow
the System to flush into the sink for fifteen (15)
minutes. This will remove any fine, black carbon
particles left over from the manufacturing process,
expel trapped air, and will condition the Cartridge for
normal use.
This procedure should be repeated
each time a new Cartridge is installed .
Congratulations!
Your FrescaPure
®
Drinking Water
System is now ready for use.
STEP 1 STEP 2 LEFT Placement
Spout
facing
into sink
line up
FRONT
of Lid
Assembly
with Hose
Outlet
10A
11
Spout
facing
into sink
line up
BACK
of Lid
Assembly
with Hose
Outlet
STEP 1 STEP 2 RIGHT Placement
10B
12