Royal Prestige FrescaPure 3000 Plus, Инструкция по использованию и уходу

Страница: 8 / 12

8
FRESCAPURE
®
4. Remove the sanitary plastic wrap from the new
Cartridge. Thread the new Cartridge clockwise onto
the threaded post on Lid Assembly until you feel
resistance. Make an additional quarter turn.
Do Not
Over-Tighten .
5. Determine which side of the sink you want your
System:
To position System on the LEFT side of
your sink:
Orient the Lid Assembly to Filter
Housing as shown.
(Fig 5A, Step 1)
Once
positioned, thread Lid Assembly clockwise
onto the Filter Housing until tightened.
(Fig. 5A, Step 2)
To position System on the RIGHT side of
your sink: Orient the Lid Assembly to Filter
Housing as shown.
(Fig 5B, Step 1)
Once
positioned, thread Lid Assembly clockwise
onto the Filter Housing until tightened.
(Fig. 5B, Step 2)
6. Position Spout so that water will flow into kitchen
sink. Turn the cold water “ON” and rotate the
Diverter Lever 90º up towards the front of the
faucet. Water will begin filling the Filter Housing.
7. Allow the System to flush into the sink for fifteen
(15) minutes .
This will remove any fine, black
carbon particles left over from the manufacturing
process, expel trapped air, and condition the
Cartridge for normal use.
This procedure should be
repeated each time a new cartridge is installed .
4
6
STEP 1 STEP 2 LEFT Placement
Spout
facing
into sink
line up
FRONT
of Lid
Assembly
with Hose
Outlet
5A
Spout
facing
into sink
line up
BACK
of Lid
Assembly
with Hose
Outlet
STEP 1 STEP 2 RIGHT Placement
5B