Page 7 of 1
4
Step 1
:
Check that the control knob (
13
) for the gas
supply system is turned to the “OFF”
position before starting any assembly.
Step 2
:
Place a 20 lbs Propane Gas Tank (not included)
into
the Metal Stand (18).
Make sure the Propane Gas Tank is placed
completely into the Metal Stand.
Turn the preassembled Wing Screw (17) in a
clockwise direction in to the Nut to secure the
Propane Gas Tank tightly.
Step 3
:
Turn the
C
ylinder
V
alve
(21)
on the tank
clockwise
direction to TURN OFF SUPPLY of
the LP Gas supply
.
Attach the pressembled Regulator
(12/19)
from the Fire Table to the Cylinder Value
(21) by turning the Black Regulator Coupling
Nut
(20) clockwise.
Make sure it is fastened securely and tighten
connections-by HAND only.
Assembly Instructions
5
2
1
1
3
