Page 8 of 1
4
Step 4
:
Remove
the Electronic igniter Cap
on the
Electronic igniter (14)
by unscrewing and slide
the Battery
(B) into the battery slot.
Make sure the positive side of the Battery
(B)
faces outwards.
Screw the Electronic Igniter
Cap
(14) over the battery,tightly.
Step 5
:
pour Lava Rocks over the Burner Ring.
The Guard MUST NOT BE BLOCKED.
Do not place more than 1/4 inch depth of lava
rocks above the burner holes.
Do not place more than
26.4
lb of lava rocks
above the burner holes.
WARNING:
Fire Table and LP-Cylinder must
be at a minimum of 60 inches apart.
Assembly Instructions
WARNING:
To ensure proper
function,
the Guard (01) on the
Burner (08) should never have lava
rocks (A) covered over it.
