Royal Enfield SCRAM 411 2021, Руководство пользователя, Страница: 60 / 110

Royal Enfield Scram 411 58
BE AN ENVIRONMENTALLY CONSCIOUS RIDER
13. It is recommended not to apply the anti-corrosion spray on
the brake discs.
14. Do not use petrol or other flammable liquids to clean or
wash on electronics parts.
15. The parts chosen using motorcycle configurator should not
be washed with soap or chemical, use only with plain water.
1. Remove ignition key and seal the ignition key barrel slot
using adhesive tape.
2. Please remove tool kit, first aid kit and other relevant
documents if any inside the right side panel before
proceeding for washing of the motorcycle.
3. Cover the silencer tail pipe, horn and control switches with
suitable plastic bags and tie it firmly to prevent water entry.
PRECAUTIONS
4. Wash the motorcycle only when the engine is in cold condition.
5. Do not remove side panel while washing to avoid water entry.
6. Brush engine area with a recommend non corrosive solvent to
remove dirt or grease.
7. Use low pressure water jet to clean.
8. Never spray water with great force on head lamp, meter/
cluster unit, flasher lights, front and rear wheel hubs, electrical
connections and wires, control cables, EFI components, spark
plug, battery, side panels.
9. Do not use high pressure washers or steam jet cleaners near
the seal of headstock bearing or steering stem bearing, seal of
wheel bearing, brake calipers, air intakes & exhaust outlets.
10. Do not apply any corrosive solvent on painted surfaces or
rubber parts.