Royal Enfield SCRAM 411 2021, Руководство пользователя

Страница: 52 / 110

Royal Enfield Scram 411 50
WARNING INDICATIONS & SAFETY SYSTEMS
An ABS indicator lamp is provided
in the console (as shown in adjacent
image) to warn the rider in the event
of any malfunction of the ABS.
When the ignition and kill switch are
switched "ON", the ABS sign light up
and remain "ON" till the motorcycle
attains a speed of 5 kmph (3 mph) and
switch "OFF". This indicates the ABS
is working properly. In the event the
lamp does not switch "OFF" and remains continuously "ON" at
higher speeds, it is recommended not to drive the motorcycle
and get the brake system inspected and corrected through a
nearest authorized Royal Enfield Distributor. Failure to do so can
result in a serious injuries and loss of life.
In the event of motorcycle falling over on either of its sides with
the engine running and the gears engaged the roll over sensor will
“Disable” both the ignition and fuel systems and switch “OFF” the
engine. This is to prevent any damage to the motorcycle and its
rider. To reset the roll over sensor and reactivate the ignition and
fuel systems.
1. Ensure the motorcycle is made upright and is on its center
stand.
2. Ensure gears are in correct neutral and the neutral lamp is
glowing in the instrument console.
3. Switch “OFF both ignition & stop switches, wait for a few
seconds and switch “ON” the ignition and stop switch again,
to start the engine.
3. Roll Over Sensor
km/h
MPH
E
AMPM
GEAR
ECO
F
18:88
8
km
miles
ODO TRIP F A B
88888.8