Royal Enfield Hunter 350, Руководство пользователя

Страница: 51 / 108

Royal Enfield Hunter 350
49
WARNING INDICATIONS AND SAFETY SYSTEMS
&$87,21$%6
„
Visually inspect for
damaged teeth on the
front ABS tone rings.
„
Inspect for damages
and dents on the face of
the teeth.
„
The teeth edges should be consistent in
appearance. In case if a toner ring is found to
be damaged or bent, it is recommended to visit
nearest dealership for necessary action.
„
Inspect for debris at the end of the wheel speed
sensor - front, if contamination is observed, it is
recommended to clear it suitably or you may visit
to nearest dealership for necessary action.
ROLL OVER SENSOR
In the event of motorcycle falling over in either of its
sides with the engine running and the gears engaged
the roll over sensor will “Disable” both ignition and fuel
systems and switch “OFF” the engine. This is to prevent
any damage to the motorcycle and its rider. To reset
the roll over sensor and reactivate the ignition and fuel
systems.
„
Ensure the motorcycle is made upright and is on its
center .
„
Ensure gears are in correct neutral and the neutral
lamp is glowing in the instrument console.
„
Switch “OFF“ both ignition & stop switches, wait
for a few seconds and switch “ON” the ignition and
stop switch again, to start the engine.