Royal Enfield Hunter 350, Руководство пользователя

Страница: 82 / 108

Royal Enfield Hunter 350
80
WASHING PROCEDURE
PRECAUTIONS
„
Remove ignition key and seal the ignition key barrel
slot using adhesive tape.
„
Please remove tool kit, first aid kit and other
relevant documents if any inside the right side
panel before proceeding for washing of the
motorcycle.
„
Cover the silencer tail pipe, horn and control
switches with suitable plastic bags and tie if firmly
to prevent water entry.
„
Wash the motorcycle only when the engine is in
cold condition.
„
Do not remove side panel while washing to avoid
water entry.
„
Brush engine area with a recommend non corrosive
solvent to remove dirt or grease.
„
Use low pressure water jet to clean.
„
Never spray water with great force on head lamp,
meter / cluster unit, flasher lights, front and rear
wheel hubs, electrical connections and wires,
control cables, EFI components, spark plug,
battery, side panels.
„
Do not use high pressure washers or steam jet
cleaners near the seal of headstock bearing or
steering stem bearing, seal of wheel bearing, brake
calipers, air intakes & exhaust outlets.
„
Do not apply any corrosive solvent on painted
surfaces or rubber parts.