Royal Enfield BULLET ELECTRA, Руководство пользователя

Страница: 47 / 69

45
PRECAUTIONS

Wash vehicle when the engine is cold.

Cover the silencer, tail pipe, carburator, horn
and control switches with suitable plastic
bags and tie it firmly to prevent water entry.

Remove ignition key and seal key hole using
adhesive tape.

Brush engine area with kerosene / diesel to
remove dirt or grease.

Use low pressure jet of water to clean the
vehicle or engine.

Never spray water with great force on head
lamp, speedometer, flasher lights, front and
rear wheel hubs, electrical connections and
wires, control cables, carburettor, sparkplug,
battery etc.

Do not apply kerosene or diesel on painted
parts or rubber parts.

Use luke warm water and mild detergent on
the painted components to remove dirt, etc.

Rinse vehicle thoroughly with plain water to
remove the detergent and wipe vehicle dry.

If possible, use compressed air and blow off
water particles from the obscure areas of the
vehicle, electrical connections etc.
AFTER WASHING

Ensure, the vehicle is throughly dry by
wiping with a clean soft absorbent cloth or
chamois leather.

Remove all plastic bags and adhesive tapes.

Lubricate control cables, pivot and rear chain
with lube oil

Polish the painted and plated surfaces using
polishing wax.

Start engine and allow to run at idling speed
for a few minutes to warm up engine.

Drive the motorcycle slowly, applying both
brakes intermittently to dry up the brake
shoes.

Test brakes for its efficiency.
W A S H I N G
P R O C E D U R E