11. To clean the rest of the device, watch up to protect the electric parts from hu-
midity and from direct water contact to avoid electric shocks and shortcircuits.
An impregnated cloth is easily enough if you regularly clean the device.
12. If you don´t use the device for a longer time or stock it, check the humidity and
temperature conditions: the air has to be dry and the device should be covered
to be protected from dust deposits.
REGULAR CLEANING
Generalities
•
The appliance must be cleaned at least once a day or if necessary more than once.
•
Scrupulously clean all the various components of the device, whether they come
in direct contact with the food product or not.
•
Never clean the device with a pressurized water-jet, industrial cleaners, and
brushes or any other type of cleaning utensil that could damage the surface of the
appliance.
•
Before cleaning you must
remove the electricity supply plug isolating the
appliance from the main power circuit.
Procedure to follow to clean the device
To clean the main structure, simply use a damp cloth. Remember to frequently rinse.
The basket and its support should be brushed clean. Carefully clean the punched holes.
Make sure all the components are completely dry before remounting them.
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If it should be the case,
please contact your customer service to solve the problem.
WHAT TO DO IN CASE OF PROBLEM?
Please contact your customer service and join following information:
•
Invoice number and serial number (the latest is to be found on the technical plate
on the device).
•
If relevant, a picture of the damaged, broken or defective part.
•
It will be easier for your customer service clerk to determinate the source of
the problem if you make a detailed and precise description of the matter. Avoid
formulations like “the device doesn´t heat”, which may mean that it doesn´t heat
enough or even not at all. Though, those two possibilities have a different causation!
•
Still indicate the performance of the lights to facilitate the diagnosis: Is the light
of the ON/OFF switch on when the rocker switch is in ON position? Does the
orange light turn on when you set the temperature?
The more detailed your information, the quicker the customer service will be
able to answer your problem rapidly and efficiently!
CAUTION: Never open the device without the authorization of your
customer service. This can lead to a loss of warranty!
TROUBLESHOOTING
Problem
Cause
Solution
The power supply is
correctly connected, but
the device shows no
reaction
1. The plug is not
properly connected
2. The microswitch has
no correct contact to
the tank, so that the
electric circuit isn´t
closed.
1. Plug the device
correctly
2. Make sure that the
microswitch touches the
tank.
The orange light is on, but
the fryer doesn´t heat.
The electric connection
of the heating element is
loose
Check the connections of
the heating element
Exchange the heating
element if necessary
The ON/OFF switch lights
up, but the temperature
doesn´t raise
The thermostat knob is
defect
The thermostat is defect
Exchange the thermostat
knob
Exchange the thermostat
!
EN
EN
8
Rev. 02.03.2021
9
Rev. 02.03.2021
