CONSIGNING THE APPLIANCE
Checking packaging upon consignment
When the goods are received proceed with opening the packaging if there are no
signs of damage. if when the goods are delivered there are signs of damage to the
packaging, such as agent or courier, and within three days from the date indicated on
the documents draw up a detailed list and report of all damage to the goods. Do not
turn the packed goods upside down! When transporting the package make sure its four
main points are firmly secured (maintain the goods parallel to the ground).
Disposing of packaging
The various items used for packaging (cardboard, plastic straps, polyurethane foam)
should be conserved, so that the device can be sent back to the service center in best
conditions in case of problem!
INSTALLING THE APPLIANCE
Appliance location
The work surface where the device will be located must be suitable for the size of the
appliance, please refer to the measurements. The work surface must be leveled and dry
and at a fitting height from the ground to enable a proper use of the device.
The power cord connected with the appliance must be reliable grounding
an correspond to the technical details.
Grounding the device
A grounding plug is mounted on the backside of the device, with which you can earth
the fryer. To do so, please use a copper cable of min. 2mm².
Basket assembly
Please check you mounted the basket and its handle right, so that the basket remains
stable while working.
!
OPERATION
1. Plug in the device.
2. Fill the tank with liquid oil, so that the oil level is between the two marks on the
side of the tank. Never use the device without oil!
3. Turn on the device. The ON/OFF knob lights up, the control light turns on.
4. Set the heating temperature by the thermostat knob. In case of using solid fat, first
it should be melted by setting thermostat knob in position „
”. After melting the
fat, increase the heating temperature to desired value.
5. The heating element starts to heat and the temperature of the device raises little
by little.
6. As soon as the temperature wished is achieved, the orange light turns off. The
heating element stops to heat.
7. As soon as the temperature of the device decreases, the thermostat reacts to it:
the heating element restarts to heat and the orange light turns on.
8. After use, reset the thermostat on zero. When that is done, you can simply turn off
the device by switching the ON/OFF knob.
9. Generally speaking, it is advisable to unplug the device while not used.
10. When the device cooled down, take out the tank, the basket, the support grid and
the heating block, empty and clean them. This should be done after each use to
keep the device in perfect hygienic condition.
EN
EN
6
Rev. 02.03.2021
7
Rev. 02.03.2021
