6
/
7
2) turn The 11 gears knob to the leftmost (minimum), press the right footswitch once,
the green light turned into yellow light. Then the 1st gear has been corrected.
3) Turn the 11 gears knob to the right (turn to the second gear), press the right
footswitch once, the green LED turned into yellow. Then the second gear has been
corrected.
4) follow above, After the all 11 gears corrected, the system will automatically restart
and enter into normal operating mode.
12, Left channel output volume control knob
The left play channel sound will turn off when turn the knob to leftmost, The left
play channel sound will maximum when turn the knob to rightmost.
13, 9V DC power
This pedal uses9 voltage and over 500mA DC power supply.
14, Right channel output volume control knob
The right play channel sound will turn off when turn the knob to leftmost, The
right play channel sound will maximum when turn the knob to rightmost.
15, USB interface
When connect to computer with USB cable, two yellow LED will light up and at
the same time, you can operate the user software .
Because our software will continue to upgrade, so if the firmware on the pedal is
not latest, when the pedal connect to computer with USB cable then a dialog box
appears to confirm upgrade and just click "YES" to complete the upgrade. See below
diagram.
After the upgrade completed, it’ll enter into the normal user interface. IMPORT
button is to download files from computer to the pedal. EXPORT button is to upload
recorded data from the pedal to the computer. only Supports * .WAV file format
now. See below diagram.
