2
/
7
5) When the mode selection switch selects the FX mode, the right footswitch control effect
on and off, using with the FX status indicator LED.
6) If the FX LED lights up, indicate effect on, press once, effect turned off, presses again,
effect turned on. Follow this cycle, see below diagram.
2
、
Left footswitch
The left footswitch is used for recording, playback, overdub, Undo, Redo, stop, clearing and
other operations, using with lOOPER indicator LED.
1) When power on,
LOOPER indicator LED off, indicate the pedal no recorded data, press
left footswitch once, then red LED of
LOOPER indicator LED lights up, entering into recording
state. After the recording is finished, press left footswitch again, then green LED of
LOOPER
indicator LED lights up, entering playing state. The system will loop the recorded data. While it
play to end of the recording, green light flashes , showing it has play to the end and restart the
next playing. Press left footswitch at any time, red LED of
LOOPER indicator LED lights up
enters into overdub state. That is overdub the input sound to the recordings. Under overdub
state the recording data will be looped. Overdub operation unrestricted on this pedal, Under
overdub state, press left footswitch, then green LED of
LOOPER indicator LED lights up,
entering playback mode, follow this cycle. See below diagram.
