3
/
7
In recording mode, press left footswitch about 2 seconds, the current recorded data will be
cleared,
LOOPER indicator LED flashes twice and then go out. In playing or overdub state,
press left footswitch about 2 seconds
LOOPER indicator LED flashes twice and then undo (or
redo) the recorded data last time.
For example, you just overdub a recording data, but it’d not good. You do not want this.
Then press left footswitch about 2 seconds
LOOPER indicator LED flashes twice, and then
delete. (undo overdub operation latest) the overdub data, however, now you want to recover
the data, so press left footswitch about 2 seconds
LOOPER indicator LED flashes twice, then
recover (just redo overdub operation latest) the overdub data, follow this cycle, see below
diagram.
Press the left footswitch twice in any state, green LED of
LOOPER indicator LED lights up
and system enters the stop mode. while stopped, press left footswitch about 2 seconds,
recording data will be cleared.
LOOPER indicator LED lights off, the operating data can not be
recovered. See below diagram.
3, FX LED
1) FX effect status indicators LED need to work with
right footswitch.
2) If it is forward playing and the effect is on, red FX LED lights up.
3) If it is reverse playing and the effect is on, green FX LED lights up.
4) If effect is off, FX LED goes off.
4. LOOPER status indicators LED
