Rowenta Steampower, Инструкции по безопасности

Страница: 9 / 88

9
EN
TROUBLESHOOTING/FAQ
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The appliance is no longer
generating steam.
Your appliance is not connected to
the power supply.
Check that the power cord is
plugged in.
The water tank is empty. Fill the water tank.
The anti-limescale cartridge is
incorrectly installed.
Re-position it correctly.
A large amount of steam is coming
out of the suction apparatus.
You are in Max position. Reduce the steam power.
The appliance is not cleaning the
floor very well.
The pad is saturated. Clean the pad.
The appliance is no longer lighting
up.
Your appliance is not connected to
the power supply.
Check that the power cord is
plugged in.
The floor is very wet after steaming. The pad is too wet. Clean it or install a new pad.
Brown stains are visible on the floor
after use.
You are using chemical descaling
products or additives in the water
tank.
Never add any products to the
water tank. Contact an Approved
Service Centre.
Steam exits
behind the
water tank.
The heating element is clogged or
the pipe is obstructed.
Unplug the product and wait for it
to cool before handling it.
Contact Groupe SEB Customer
Service or the nearest Approved
Service Centre.
Downloaded from www.vandenborre.be