Rowenta RO 8049 Скачать руководство пользователя

Страница: 25 / 36

Set the suction power using the manual
power switch on the power nozzle: open the
regulator cover to adjust the suction power
manually if the nozzle is too difficult to move
on fragile surfaces

(fig.9)

• Position

for fabrics and furniture

• Position

for parquets and
smooth flooring

• Position

for rugs and
wall-to-wall carpeting

3 • Storage and transport of

the appliance

After use, switch off your vacuum cleaner by
pressing the ON/OFF button and unplug it

(fig.10)

. Rewind the power cord by pressing

the power cord rewind button

(fig.11)

Use the carrying power nozzle to carry your
vacuum cleaner easily

(fig.12)

When storing your vacuum cleaner, you can
park it either vertically or horizontally

(fig.14)

. Place the tube in the storage slot

underneath or at the back of the appliance, in
the parking position

(fig.15)

CLEANING AND MAINTENANCE

The air we breathe contains particles that may be
allergens:  mite  larvae  and  droppings,  mould,
pollen,  smoke  and  animal  residues  (hair,  skin,
saliva,  urine).  The  smallest  particles  penetrate
deep into the respiratory system where they can
cause inflammation and cause lung impairment.
HEPA  filters  (High  Efficiency  Particulate  Air)  are
used to filter out the smallest particles.
With the HEPA filter, the air released back into the
room is healthier than the air that is vacuumed.

1 • If you have the mechanical

model*: mechanical cleaning

of the HEPA filter and

emptying of the dust

container

Each time after use, we recommend that you
clean the HEPA filter to maintain optimum
suction power.

The HEPA filter is cleaned using the cleaning knob (6).
After use, switch off your vacuum cleaner, unplug it
and open the cover by pressing the "OPEN" button

(fig.16)

, remove the bowl

(fig.17)

, actuate the

IMPORTANT

Do not use the power nozzle

of the dust container to carry the appliance

(fig.13)

*Depending on model:

this is either equipment specific to certain models or available as an optional accessory.

HEPA filter cleaning knob by turning it in a
clockwise direction

(fig.18)

, then remove the

filter assembly (3 and 5)

(fig.20)

, tapping it

gently against the side of the bowl to remove any
excess dust

(fig.21)

then empty the dust

container

(fig.22)

. Clean the separator the cover

using a cloth if it is dirty

(fig.23)

. Put the filter

assembly (3 and 5) back inside the dust container

(fig.24)

. Then fit the dust container back into its

housing and close the vacuum cleaner cover

(fig.25)

2 • If you have the automatic

model*: automatic cleaning of

the HEPA filter and emptying of

the dust container

Cleaning is performed automatically and
requires no action from you. It is carried out
when required when your vacuum cleaner is
switched on or off.
NOTE: Your vacuum cleaner makes a clicking
noise during the cleaning operation, this is
completely normal

(fig.19)

IMPORTANT

Do not use the vacuum

cleaner once the maximum level is reached I
the dust container.

IMPORTANT

Do not operate your vacuum

cleaner without the filtration system fitted (3
and 5).

IMPORTANT

Always switch off and unplug

your vacuum cleaner before cleaning or
servicing.

IMPORTANT

Each time after use, we