Rowenta JA10 Series, Руководство пользователя и инструкции по безопасности

Страница: 10 / 20

10
IS THERE A PROBLEM ?
Problems Possible cause Solutions
Blades do not turn
when switch on
Metal grid blades guard is not
fully screwed. Fully screw the metal grid
blades guard.
Battery low power or lose
performance.
Replace battery
Battery install Upside-Down.
Reset in + and - locations.
Check contacts not deform
Battery is the wrong model.
Replace by AA (LR6) 1.5V .
Check contacts not deform.
Motor low speed
Battery low power or lose
performance.
Replace battery.
Lint tank is full. Empty tank
Blade support is stuck by lint.
Remove grid.
Clean up blade support by
brush use.
Metal grid blades guard is not
fully screwed.
To check grid full screwed
Grid metal blade guard is
deformed.
To check grid.
Blade support is not well located.
Unscrew metal grid blades guard.
Check that the blades support is
fully inserted in its axis.
Efficiency is not perfect
Height is not adapted to the lint.
Adjust the shaving height by
turning the height adaptor.
Motor speed is low
Check batteries.
Check Lint tank.