Assembly
3. Install the Front Wheel.
•
As shown in step 1, insert the front axle through the handle tubes and front
wheel, with washers on either side of each handle tube.
•
Fasten the front axle and wheel to the handle tubes with two nuts, using the
supplied spanners to tighten
until the nuts reach the limit of the threads
.
NOTE
After assembling the front wheel and axle assembly, check the gap
between the
wheel and the handle tubes. If the gap is excessive and
the wheel is not well located, it is recommended to add additional
washers (not supplied) between the wheel and the handle tubes. After
doing this and reassembling the
axle, check that the gap is minimal,
however, that the wheel is able to spin freely. If the wheel is binding,
remove a washer.
