Assembly
•
This product requires adult assembly. Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's unassembled state. Care should be
taken in unpacking and assembly of the vehicle. Children should not handle parts,
or help in assembly of the vehicle.
•
Identify all parts before assembly and save all packaging until assembly is
complete to ensure no parts are discarded.
•
Some tools (not supplied) may be required for assembly, such as a Phillips head
screwdriver and pliers.
1. Install the Mudguard.
•
As shown in step 1 , rotate the mudguard sideways then slide it up the left handle tube.
Note!
Do not allow the "convex point" to get caught in hole 1.
•
As shown in step 2, install the mudguard so the "convex point" enters hole 2.
2. Install the Right-Hand
H
andle Tube.
•
As shown in the picture, remove
the two bolts and nuts from the
handle clamp.
•
Slide the right handle tube
through the clamp and mudguard.
Rotate the handle slightly so the
"convex point" does not get
caught in hole 1. When the
handle is in the correct position,
rotate it so the "convex point"
enters hole 2. Secure the handle
tube to the clamp using the two
bolts and nuts.
