RN-131G
rn-131-um.pdf 5/14/2009
www.rovingnetworks.com
Phone 408-395-6539
- 12 -
show net
Displays current network status, association, authentication, etc.
show rssi
Displays current last received signal strength.
show stats
Displays current statistics, packet rx/tx counters, etc.
show time
Displays number of seconds since last powerup or reboot
show i
Displays IO pin levels status in this HEX format: 8ABC
Example: show I returns 8103 indicates pins 0, 1 and 9 high
level.
show c
Displays connection status in this HEX format: 8XYZ
Bit loc
13-16
9-12
7
6
5
4
0-3
function
fixed
channel
DNS found
DNS server
Authen
Assoc
TCP status
value
8
1-13
1=resolved
1=
contacted
1= OK
1=OK
0= Idle,
1=Connected
3= NOIP
4= Connecting
8
ACTION Commands
$$$
enter command mode
Characters are PASSED until this exact
sequence is seen. If any bytes are seen before these chars, or
after these chars, in a 1 second window, command mode will not
be entered and these bytes will be passed on to other side.
close
disconnect a TCP connection.
exit
exit command mode.
Exit command mode. “EXIT” will be
displayed.
join <ssid>
joins the network <ssid>. If network is security enabled you
must set the pass phrase with the
set wlan phrase
command
prior to issuing the
join
command
join # <num>
join a network from the scan list. <num> is the entry number in
the scan list that is returned from the scan command. If network
is security enabled you must set the pass phrase with the
set
wlan phrase
command prior to issuing the
join
command
open <addr> <port>
opens a TCP connection to the given IP port and address.
If no
arguments are provided the device will attempt to connect to the
stored remote IP address and remote port number.
Ping <g/addr> <num>
ping remote host. Default sends 1 packet. Optional <num> sends
<num> pings at 10 per second.
ping 0
- terminates a ping command
Ping 10.20.20.12 10
– pings IP address 10 times
ping g
- pings the gateway
