Roving Networks RN-131 Скачать руководство пользователя страница 87

Страница: 87 / 96

www.rovingnetworks.com

Version 1.0r 9/21/2012

RN -W IFLYCR -U M

COMMAND LIST

Tables 32 through 36 provide a listing of all available commands and their defaults. For more detailed information refer to
“Command Reference” on page 5.

Table 32. Set Command List

Command

Default

Description

set adhoc beacon

value

100

Sets the ad hoc beacon interval in milliseconds.

set adhoc probe

value

Sets the ad hoc probe timeout in seconds.

set broadcast address

address

255.255.255.255

Sets the address to which the UDP hello/heartbeat message is sent.

set broadcast interval

mask

Sets the interval (in seconds) at which the hello/heartbeat UDP
message is sent.

set broadcast port

value

55555

Sets the port to which the UDP hello/heartbeat message is sent.

set comm $

char

Sets character used to enter command mode to <

char

set comm close

string

*CLOS*

Sets the ASCI string that is sent to the local UART when the TCP port
is closed.

set comm open

string

*OPEN*

Sets the ASCI string that is sent to the local UART when the TCP port
is opened.

set comm remote

string

*HELLO*

Sets the ASCI string that is sent to the remote TCP client when the
TCP port is opened.

set comm idle

value

Sets the idle timer value in seconds.

set comm match

value

> | <

hex

Sets the match character in hex or decimal.

set comm size

value

Sets the flush size in bytes.

set comm time

value

Sets the flush timer.

set dns address

address

0.0.0.0

Sets the IP address of the DNS sever.

set dns name

string

server1

Sets the name of the host for TCP/IP connections to <

string

set dns backup

string

rn.microchip.com

Sets the name of the backup host for TCP/IP connections to <

string

set ftp addr

address

0.0.0.0

Sets the FTP server’s IP address of the FTP server.

set ftp dir

string

public

Sets the starting directory on the FTP server.

set ftp filename

filename

See description

Sets the name of the file that is transferred when issuing the

ftp u

command, where <

filename

> is the firmware image. Default is

wifly_GSX-<

version

>.img (RN-131) wifly_EZX-<

version

>.img (RN-

171).

set ftp mode

mask

0x0

Sets the ftp mode, where <

mask

> indicates active or passive mode.

Default is passive.

set ftp remote

value

Sets the FTP server’s remote port number.

set ftp time

value

200

Sets the FTP timeout value, where <

value

> is a decimal number that

is five times the number of seconds required.

set ftp user

string

roving

Sets the user name for accessing the FTP server.

set ftp pass

string

Pass123

Sets the password for accessing the FTP server.

set ip address

address

0.0.0.0

Sets the WiFly module’s IP address.

set ip backup

address

0.0.0.0

Sets a secondary host IP address.

set ip dhcp

value

Enables/disables DHCP mode.

set ip flags

mask

0x7

Sets the TCP/IP functions.

Содержание RN-131

































































































Результаты поиска

Содержание RN-131

Отзывы:

Roving Networks RN-131, Руководство пользователя, Страница: 87 / 96

Результаты поиска

Содержание RN-131

Отзывы: