www.rovingnetworks.com
8
RN -BT -SR L-U M- 1.0
Figure 4. Enter Command Mode
COMMAND SUMMARY
All configuration information is stored in flash memory. The
set
command modifies the flash memory; however, the
Bluetooth module only reads the configuration from flash memory when powering up or after a reboot. Table 4 shows some
common configuration commands.
Table 4. Common Configuration Commands
Command
Description
SU,9600
Sets the UART baud rate to 9600.
SN,myname
Sets the Bluetooth name to
myname
.
SA,1
Enables secure authentication.
SP,secret
Sets security code to
secret
.
SF,1
Restores all values to the factory defaults.
R,1
Reboots the module.
Refer to the
Bluetooth
Advanced User Manual
on the Support page of the Roving Networks website at
http://www.rovingnetworks.com/Support_Overview
for more information on the command set.
