44
SOFTWARE UPGRADES
Once you have identified and downloaded the correct
program on your
( for
more information, read the respective S.M.A.R.T. page in this user guide ) install it on your
in order
to upgrade your Meter’s
. The proceed as follows:
identify the exact
of your Meter and click on the
corresponding picture;
file and download it on your PC;
icon.
Before carrying out your Meter’s SW upgrades, we suggest you
: e-mail messages, internet, management programs, etc.
Also check that the Meter’s batteries are charged and that the Meter is connected to the mains.
Most importantly do not turn off or disconnect the Meter from the mains during the upgrade. The
Meter will automatically turn off once the SW upgrade has been completed.
N.B.
If the graphic of your PC bar showing the upgrade advancement blocks, do not interrupt the
procedure because the SW download is still taking place even if the PC monitor does not
correctly show the advancement in sequence.
1.
Connect your Meter to the mains and turn it on;
2.
Wait for the Start-Up phase of the Meter to finish correctly;
3.
Connect the
cable,
to the Meter and
to the
;
4.
Start up the
program in your PC;
5.
In the ROVER S.M.A.R.T. program window, click on
followed by
;
6.
In the
Open
window, select the “
downloaded from the Update SW Area;
7.
Click on
and confirm the selection;
8.
9.
If this does not happen, the
window will open, select the exact model of your
Meter and click on
to carry out the Upgrade manually;
10. Wait a few minutes, the ROVER S.M.A.R.T. program will load the new SW in your Meter;
11. Once the download has been completed, the following message on the PC will appear:
Power
;
12. If the Meter did not automatically turn off, turn it back on again and check, in the Start-Up or Self-
Test window ( METER INFO - INFO ABOUT ), the SW version number.
Содержание OMNIA 7000
Страница 1: ...USER S GUIDE www roverinstruments com TFT 16 9 TFT 16 9 TFT 16 9 TFT 16 9...
Страница 29: ...29 OPTIONS...
Страница 39: ...39...
