Rover Instruments MASTERSAT Evo, Руководство пользователя, Страница: 21 / 28

21
cleAninG THe MeTer
Cleaning the meter from dust and dirt is easy and helps mantaining it in optimal work conditions
through the years. The cleaning procedure is simple and quick and requires only minor attention.
never use chemical aggressive products (diluent) and/or abrasive or rough clothes which may
damage plastics and displays.
Always use a soft cloth, damped with a simple water and alcohol solution or a de-greasing not
abrasive liquid soap.
Keyboard and display should be gently cleaned. rubbing the keyboard and/or the display(s) may
seriously damage their functions.
MAinTenAnce AnD cAre oF THe MeTer
This meter has been designed to withstand severe conditions of use. Even so, its life may be prolonged
by respecting some simple and effective rules:
• The meter has not been designed to withstand high temperatures (over 60°C or 140° f). Those
temperatures can be easily reached when the meter is left in a car, especially behind the
windshield, or in the trunk. The LCD display and/or other details may easily be damaged by the
extreme temperature.
• The internal battery may rapidly loose its efficiency if exposed to high or low temperatures. This will
result in reduced autonomy of the meter when powered by internal battery.
• when recharging the internal battery, do allow a good air circulation around the meter and the
adapter: do not cover it with clothes and do not recharge the battery when the meter is contained
in its transport case
• The meter is not waterproof, even if it is protected against incidental water drops. In case of contact
with water, electronic circuits may be damaged, allow the meter to dry thoroughly before trying to
turn it on. Do not use hairdryer or other strong heating sources, but just leave the meter in quiet air.
If possible, contact rover Laboratories S.p.A. Technical Assistance.
Meter MAIntenAnCe
SerVICe noteS and GuArAntee reGulAtIonS
(CEE and EXTrA CEE)
rOVEr Laboratories. S.p.A. has a standard guarante period of 12 months.
This is extended to 24 months for countries within the European Community, and in any case, in
accordance with the laws and/or possible regulations applied in your country.
GuArAnTee reGulATionS:
1. IMPOrTAnT: the guarantee is valid only upon the presentation of invoice or receipt to rOVEr
Laboratories S.p.A. The purchase date must be clearly indicated on the invoice/receipt.
2. The guarantee covers the replacement free of charge of parts only, when malfunctioning
is solely due to manufacturing faults. The faults must be indentified and defined by rOVEr
personnel only.
3. The guarantee is void if:
a. the equipment is tampered with or repaired by non-authorized personnel
b. damage is found, caused by the incorrect use of the equipment, without following the advice
explained in the user’s guide accompanying the equipment.
c. damage is found caused by the use of the equipment in unsuitable working environments.
4. The following parts are not covered by the guarantee:
a. Parts subject to wear, such as aesthetic ones, keyboard, plastic chassis, etc.
b. batteries: 3 months from the date of purchase, if original.
c. bags and carrying cases, including shoulder straps.
5. The equipment can not be replaced and the guarantee is extended after the repair of a fault.
SerVice noTeS AnD proceDureS:
6. The equipment can only be repaired by the manufacturer or by an authorized rOVEr
Laboratories service center:
a. Before returning the meter for repair, always contact the distributor where you purchased
the unit or an authorized service center if present in your area to obtain the return
procedure for your analyzer. If no authorised ROVER service centers are available in your
area, please contact ROVER Laboratories S.p.A. directly at the following data:
• wecare@roverinstruments.com
• +39 030 990 6894
fax number
b. Important: please take note that non-authorised returns for repair to ROVER Laboratories
S.p.A. will be rejected.
c. When returning the meter, always send it with the following documentation attached:
• the fully-compiled FAULT IDENTIFICATION FORM
• transport document
• the eventual request for an estimate of repair costs
d. Please note that the request for an estimate of repair costs must be submitted upon return
of the analyzer with a written note. If the repair cost estimate is not accepted, ROVER
Laboratories reserves the right to charge the customer for the estimate costs analysis.