1307-R15040039-AA
Page 8 of 10
1-800-59-ROUSH
4.
Re-install the shifter boot over the top of the shifter handle and snap it into place on the
console. Slide the shifter boot collar down on the handle until “ROUSH” is visible.
5.
Re-install the jam nut onto the handle until it bottoms on the threads.
6.
Re-install the knob onto the handle until it bottoms on the jam nut, and then turn it counter-
clockwise until the shifter pattern is lined up.
7.
While holding the knob in position, turn the jam nut counter-clockwise until it seats against
the knob. Tighten the jam nut to hold the knob in position, using a 17mm wrench.
