1307-R15040039-AA
Page 7 of 10
1-800-59-ROUSH
Assembly (
ROUSH Billet Shifter Handle with Damper Installation)
1.
Install the shifter handle with damper onto the short throw shifter.
A.
Slide the shifter handle and damper assembly over the short throw shifter (the dust
boot will have to be pressed down).
B.
Place a few drops of Loctite
®
242 medium strength thread locker (or equivalent) on
end of each 1.75" length bolt and on the shifter threads before installation (be sure
to use the new 1.75” length bolts included in the kit).
2.
Hand-tighten the bolts, making sure that the rubber damper assembly is compressing
evenly around the shifter handle. The bolt heads should tighten against the steel damper
clamp.
3.
Use a 7/32” hex driver and torque wrench to torque the (2) 1.75” length bolts to 35 Nm (25
lb-ft).
