Roundup 9210805, Руководство пользователя

Страница: 5 / 20

UNIVERSAL TOASTER UTX-200L
5 P/N 1010992 Rev. K 03/15
McDonald’s
UNIVERSAL TOASTER UTX-200
1 P/N 1010904 09/06
McDonald’s
UNIVERSAL TOASTER
MODEL UTX-200
Manufacturing Number 9210800 and 9210802
Place this manual in the Toaster section of your Equipment Manual.
Manufactured exclusively for McDONALD’S® BY
A.J. ANTUNES & CO. 180 KEHOE BLVD.
CAROL STREAM, ILLINOIS 60188, U.S.A. PHONE: 1-630-784-1000 TOLL FREE: 1-877-392-7854
FAX: 1-630-784-1650 www.ajantunes.com
TABLE OF CONTENTS
This manual is for the exclusive use of licensees and employees of McDonald’s Systems, Inc.. © McDonald’s Corporation All Rights Reserved
LIMITED WARRANTY
The Antunes Food Service Equipment Division of A.J. Antunes & Co. provides the following limited warranty to the original purchaser of all McDonald’s Equipment manufactured and purchased after January 1, 2003.
All components are warranted against defects in the material and workmanship for a period of two (2) years from date of original installation, not to exceed 30 months from date of shipment from our factory. If any part becomes defective during the first two (2) years after the original installation date, Antunes Food Service will pay negotiated straight time labor costs to an
Authorized Service Agent to replace the part, plus travel expenses up to 50 miles/80 km, 1 hour each way (100 miles/160 km, 2 hours round trip).
Antunes Food Service reserves the right to make changes in design or add improvements on any products. The right is always reserved to modify Equipment
because of factors beyond our control and government regulation. Changes to Equipment do not constitute a warranty charge. This warranty is exclusive and is in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular pur - pose, each of which is expressly disclaimed. The remedies described above are exclusive, and in no event shall A.J. Antunes & Co. or any of its Divisions be liable
for special consequential or incidental damages for the breach or delay in the performance of this warranty.
WARRANTY EXCLUSIONS • The cost of Installation.
• Equipment that has been damaged due to shipment. Purchaser should make damage claim directly upon carrier. • Alteration, misuse, abuse.
• Improper storage or handling. • Improper maintenance. • Failure to follow proper Installation instructions, including electrical connec-
tion. • Improper or unauthorized repairs.
• Scheduled Maintenance procedures as outlined in your MRC Card. • Consumables such as Grill Covers (Release Sheets), gaskets, Conveyor Belt
Wraps, O-Rings, and light bulbs. • Overtime or Holiday charges. • Mileage over 50 miles/80 km (100 miles/160 km round-trip), or travel time
over two (2) hours. • Freight, foreign, excise, municipal or other sales or use taxes. • Consequential damages such as loss of profit, loss of time, the cost of repair-
ing or replacing other property which is damaged, or any other incidental damage of any kind.
Owner Information .....................................................2 General ......................................................................2 Warranty Information .................................................2
Service/Technical Assistance ....................................2 Specifications .............................................................3
Electrical Specifications & Plug Configuration ..........3 Dimensions ................................................................3
Important Safety Information ....................................4 Installation .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 5
Unpacking ..................................................................5 Location .....................................................................5
Assembling the Unit ..................................................6 Operation .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 7
Operating Instructions ...............................................7 Breakfast to Lunch Change-over ..............................7
Product Labels and Toasting Product .......................8
Bun Thickness Compression Control Knob Settings 9 Viewing the Program Mode Settings ...................... 10
Adjusting Toasting Quality ...................................... 10 Universal Toaster Settings .......................................11
UTX-200 Unit Status Mode .....................................11 Purging Products from the Toaster ......................... 12
Shutting down the UTX-200 ................................... 12 Maintenance ..............................................................13
Cleaning the Accessories, Release Sheet, and Vertical Conveyor ...................................................13
Troubleshooting .......................................................15 Replacement Parts ...................................................17
Wiring Diagram .........................................................35
C
T IS L
US
ED
A S
D L IS T E CM
OIN N IT AT
Release
Sheet (2)
Bun
Buffer
Owner’s
Manual
Breakfast
Chute
NOTE: If any parts are missing or damaged,
contact Technical Service IMMEDIATELY at 1-877-
392-7854 (North America only), or 630-784-1000.
INSTALLATION
CAUTION
1. Provide at least 1 inch (25.4 mm) clearance on
both sides of the UTX-200L (or CTX-200L if used
with the UTX-200L) from any combustible wall or
surface. Leave front and back open.
2. Do NOT operate unit on a combustible surface
or counter top.
WARNING
Use caution while the unit is operating. The unit
and accessories will be hot to the touch. Use Heat
Resistant Gloves when removing any accessories
while the unit is operating. Personal injury may
result.
Open the Large Box. Remove and open the Accessory Box.
Set accessories, parts, and manual aside.
DO NOT DISCARD
ACCESSORIES BOX!
1
Remove UTX-200L from box. Place in desired location.
Wipe down the entire unit with a clean damp cloth.
2
Bun Buffer
Wash all metal accessories in hot, soapy water and allow to
air dry. Attach Bun Buffer to front of unit.
3
Plug the power cord into the appropriate outlet.
If CTX-200L is present : Remove Compression Knob from
side of the UTX-200L closest to the CTX-200.
Do NOT discard the knob.
Crumb
Tray
Breakfast
Chute
Insert Breakfast Chute over Crumb Tray TAB END FIRST.
Hook the chute over the top of Crumb Tray. Slide Crumb Tray
fully into unit.
NOTE: CTX-200
can be placed
to the left or right
of UTX-200
Remove the knob
closest to the CTX-200
Plug the
Power Cord
into the
appropriate
outlet
5
4
NOTE: Wash all metal
accessories prior to
installation!