Roughneck 42595, Руководство пользователя

Страница: 6 / 14

5
When mounting on the wall, use the respective holes in
the vertical part of the base. NOTE: Install sharpener with
some distance from the wall (use spacers) in order to
retain access to the rear set screw.
After the bench top installation, fit the arm in the base,
inserting the pilot pin and securing it with a hexagonal
screw (Fig.2).
Now, fit a washer (included) on the rear side screw and
screw on the setting wheel (Fig.3).
Screw the hand piece onto the bolt in the grinding disc
body (Fig.4).
Secure the grinding disc guard using the supplied screws
and a wrench (Fig.5).
Tip:
When mounting on the wall, take care to mount the
machine at a height of about 50 inches to avoid working
at eye level.
To be able to install the disc, it is necessary to unscrew
the auxiliary flange (Fig.6).
5. Grinding Disk Check
To avoid injure and accidents, only use grinding discs free of
defects.
Check the disc you are about to use for damages prior to
installation.
Insert a pencil horizontally through the hole and allow the disc to
swing freely. Carefully tap the disc edge with another pencil. The
disc should give a clear, high-pitched sound. If the sound is
dampened or blank, the disc is defective and should not be used! A
SHARPCHAIN.COM