Page 2 of 16
GENERAL SAFETY REGULATIONS
WARNING:
Read and understand all instructions.
WARNING:
The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur.
It must be understood by the
operator that common sense and caution are factors that cannot be built into this product, but must be
supplied by the operator.
1. Keep the work area clean and dry.
Damp or wet work areas can result in injury.
2. Keep children away from work area.
Do not allow children to handle this product.
3. Store idle equipment.
When not in use, tools and equipment should be stored in a dry location to
inhibit rust. Always lock up tools and equipment, and keep out of reach of children.
4. Use the right tool for the job.
Do not attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will do the
job better and more safely at the capacity for which it was intended. Do not modify this equipment, and
do not use this equipment for a purpose for which it was not intended.
5. Use proper eye protection when assembling and using the kit.
6. Check for damaged parts.
Before using this product, carefully check that it will operate properly and
perform its intended function. Check for damaged parts and any other conditions that may affect the
operation of this product. Replace damaged or worn parts immediately.
7. Do not overreach.
Keep proper footing and balance at all times to prevent tripping, falling, back injury,
etc.
8. DO NOT use the equipment when tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating this equipment may result in serious personal injury.
9. Industrial applications must follow OSHA requirements.
SPECIFIC OPERATION WARNINGS
WARNING: The included pump mainly provides power during oil transportation.
Any other use can
cause unsafe operating conditions and result in component rupture, fire or explosion, which can cause
serious injury, including fluid injection.
WARNING: To prevent personal injury, perform the Pressure Relief Procedure before and after
operating the pump and before performing any disassembly or assembly.
WARNING: Failure to follow these warnings could result in serious personal injury or even death.
1. EQUIPMENT MISUSE HAZARD:
Equipment misuse can cause the equipment to rupture or malfunction
and result in serious injury.
This equipment is for professional use only.
Read all instruction manuals, tags, and labels before you operate this equipment.
Use the equipment only for its intended purpose. If you are not sure, call the distributor.
Do not modify this equipment. If you need to replace the parts, use standard parts or components.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated component in your system.