Rottler Manualmatic SG8MTS, Руководство по эксплуатации и обслуживанию

Страница: 7 / 109

Section 1 Introduction SG8MTS Manual
www.rottlermfg.com
1-2
Description
The SG8MTS uses the same proven fixed carbide pilot tooling as SG8M but now has a front mount
steering wheel for spindle downfeed.
The machine have 2 modes of operation:
1. MANUALMATIC – a brand new concept has been added to these machines which should increase
productivity by 30-50%. During seat cutting, the operator does not have to operate any buttons or
switches, simply turn the spindle feed steering wheel up and down and the control takes care of all the
functions like workhead float/clamp, pilot centering in the valve guide and spindle on/off. When depth of
seat is reached, the control automatically changes spindle RPM to high/finish speed to give equal depth
of every seat and consistent surface finish results.
2. MANUAL – the buttons on touch screen are the same as the previous SGM machines. There is no
external dial gage, the spindle vertical position is displayed on the touch screen. Simply feed the spindle
down until the cutting insert touches the valve seat, touch set zero button and then the digital display will
show exactly where the spindle is at all times. The change from low to high/finishing speed is easier as
there are 2 separate buttons. The foot pedal for clamp and float of workhead has been eliminated and
now controlled on touch screen for manual and automatically for MANUALMATIC.
The SG8MTS features Rottler’s trademark CONCEN that guarantees you get the most accurate and
versatile machine possible. Rottler combines precision carbide centering pilots with a light weight air
float workhead to giveyou perfect centering with the valve guide - every time. This guarantees the best
CONCEN of valve seat to valve guide centerline in the industry.
Disclaimer
The SG8MTS Manual (henceforth to be referred to as the “Manual”) is proprietary to Rottler
Manufacturing LLC. (“Rottler Manufacturing”) and no ownership rights are hereby transferred. No part
of the Manual shall be used, reproduced, translated, converted, adapted, stored in a retrieval system,
communicated or transmitted by any means, for any commercial purpose, including without limitation,
sale, resale, license, rental or lease, without the prior express written consent of Rottler Manufacturing.
Rottler Manufacturing does not make any representations, warranties or guarantees, express or implied,
as to the accuracy or completeness of the Manual. Users must be aware that updates and amendments
will be made from time to time to the Manual. It is the user’s responsibility to determine whether there
have been any such updates or amendments. Neither Rottler Manufacturing nor any of its directors,
officers, employees or agents shall not be liable in any manner whatsoever to any person for any loss,
damage, injury, liability, cost or expense of any nature, including without limitation incidental, special,
direct or consequential damages arising out of or in connection with the use of the Manual.
Rottler Manufacturing and its employees or representatives are not responsible for any information
regarding final specifications of any workpiece that is created as a final product when using Rottler
equipment. It is the responsibility of the end user of Rottler equipment to determine the final dimensions
and finishes of the workpiece that they are working on. Any information regarding final dimensions and
finishes that appears in any Rottler literature or that is expressed by anyone representing Rottler is to
be regarded as general information to help with the demonstration of or for operator training of Rottler
equipment.