Rottler H85A, Руководство по эксплуатации и обслуживанию

Страница: 42 / 179

Section 4 Control Definitions H85A Manual
www.rottlermfg.com
4-2
COMMON INTERFACE NOTICE
All Rottler machines using Direct Motion technology share a common control interface. This allows for a
better environment for programing machine functions across a wide range of different machines. This also
allows for easier deployment in shops already using Rottler Direct Motion machines.
Because of the common interface some machines may have buttons and menu tabs that may not be
applicable to the machine that is being used. If the buttons or menu tabs are not mentioned in the control
definitions section of the manual, they will not be used in machine operation.
Definitions of terminology used in this section
Screen: This is what appears on the monitor. There are different screens for setting up the machine and
to operate it.
Icon: A small graphic that is located on the screen. The Icon is used to activate various programs related
to machine operation.
Button: A small graphic that is located on the screen as part of group of buttons that is used to set up
or operate the machine. A button has two different possible functions. One is when it is used as switch.
When it is used as switch the button will either be on or off after it has been pressed and must be pressed
again to revert to start status. The second is as contact switch. This is also called a momentary contact
button. This button is active only while it is being pressed by the operator.
Click: This is a method of activating an icon or button using a computer mouse. On a touch screen such
as the one that this machine is equipped with you can use your finger tip or a stylus to activate the icon or
button.
Press or Touch:
Use your finger tip to activate a button on the screen.
Activate: A way of indicating that button, menu title, or tab has been clicked on or pressed.
Tab: A small box located near the top of the screen. A tab will be labeled with the function of a screen that
will appear when the tab is clicked or touched.
Value Box: This is where values that are needed to run a program are entered. Touching a value box will
case a number pad to appear so that the desired value can be input.
Menu Title: A one or two word title that describes the contents of a menu. Clicking or touching an Option
Title will cause a menu to appear below it.
Menu: A box that appears below an Option Title when it is activated. A menu will contain a number of
functions that can be activated or deactivated by clicking or pressing the title. Or when activated another
menu will open up with more functions that can be activated.
Pop Up Window: This is a box that will appear when certain buttons, menu titles, or value boxes are
activated. These Pop Up Windows can be warnings, requests for input, or confirmation requests.