IN-E-HyFlex-V4_10
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
Instruction Manual
Document Type
HygroFlex transmitter version 4: instruction
manual
Document title
Page
7
of 61
© 2006; Rotronic AG IN-E-HyFlex-V2_10.doc
HygroClip IW
for surface mount (area monitoring)
max. 85
°
C (185
°
F) – wire mesh filter
observe temperature limits of transmitter
electronics
HygroClip IC-1 (100mm) / IC-3 (250mm)
for through-wall installation
max. 200
°
C (392
°
F) - wire mesh filter
HygroClip IM-1 (120mm) / IM-3 (270mm)
for through-wall installation in high humidity
applications
max. 200
°
C (392
°
F) - wire mesh filter
HygroClip IE-1 (G ½”) / IE-2 (NPT ½”)
for compressed air (max. 50 bar / 725 PSI)
max. 85
°
C (185
°
F) – sintered steel filter
to avoid errors, temperature should be the
same on both sides of the mounting wall
HygroClip IC-05
for measurement in tight spaces
max. 100
°
C (212
°
F)
HygroClip ID-EX-xxx (intrinsically safe)
for through-wall installation
xxx = 002 to 100
from 2 to 100 m cable length (about 6.5ft to 328ft)
max. temperature at sensors: 200
°
C (392
°
F)
probe length 250 mm - sintered steel filter
HygroClip IW-EX-xxx (intrinsically safe)
for surface mount (area monitoring)
xxx = 002 to 100
from 2 to 100 m cable length (about 6.5ft to 328ft)
max. temperature 40°C (104°F)
probe length 150mm
sintered steel filter
Probe Extension Cable AC1616/xxx
with built-in signal booster
xxx = 002 to 200
from 2 to 200 m (about 6.5ft to 656ft)
max. temperature 85
°
C (185
°
F)
