2200293
_5982
2016 05 02
English
EN
6. In the case of the 1/4" and 3/8" female connectors,
the support ring and the O-ring must be inserted
from the other end of the pusher tube (the end
furthest away) compared to figure 23.
NOTE! The support ring must be inserted first,
black marking facing up toward the pusher,
followed by the O-ring. Then place the pusher on
a table or other flat surface and press the seal
to the bottom with the aid of the pusher piston
(see figure 25).
7. Place the pusher against the female connector
and press firmly against the pusher piston.
See figure 26.
8. Make sure the nose seal is properly installed; (see
figure 27).
Figure 26
Figure 27
