17
© Rotor Lips AG
CH-3661 Uetendorf
Grossküchen- und Bäckereimaschinen
Rotor Vitamat INOX
Instruction Manual
English
5. ELECTRICAL CONNECTION
The
power supply voltage must correspond
to the values on the
rating plate on the appliance (the voltage rating is given in volts [V]
and fullfill the requirements listed in chapter „Technical data“.
The appliance should only be connected to a
single phase grounded
alternating current.
Make sure that the original mains cable and
the wall outlet correspond.
6. PUTTING INTO OPERATION
Before using the appliance for the first time it must be
thoroughly cleaned
. Follow the
instructions in Chapter „Cleaning“.
Place the correctly mounted juice extractor Vitamat INOX on a
firm, flat base.
Make
sure by organisational or technical means, no fluids can gather underneath the machine
(hygiene, electrical security). Plug it into a nearby, appropriate electrical outlet.
The pulp can be output different ways:
- directly into the container (only use the original type!).
- marc pipe through bar (optional accessory).
For safety reasons the outlet must have a faulty-energy-protection switch (FI).
If at all possible, avoid using an extension cord. If it is unavoidable, only proper, approved
extension cords should be used.
Do not subject the mains cable to strong tension or pressure.
To replace the cable
, see chapter „Repairs“.
Содержание Vitamat INOX
Страница 2: ......
