Rotomec HURRICANE H40-048 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 40

Rotomec HURRICANE H40-048 Скачать руководство пользователя страница 20

3.11 - Removing Mower from the Tractor

CAUTION: Disengage tractor PTO. Set parking brake. Stop engine and remove
key from ignition. Disconnect mower driveline from tractor PTO shaft. Collapse
driveline and store in appropriate place. Disconnect three point linkage and
carefully drive tractor away from mower.

3.12 - Transport

CAUTION: Make sure PTO is disengaged and blades have stopped turning before
raising mower to full transport position. Do not tow tractor and mower behind
other vehicles. Use a properly equipped trailer with heavy tie-downs for towing
operations.

Before transporting:
1. Always select a safe ground speed that is appropriate for the terrain.
2. Beware of traffic on public roads. Install a SMV (Slow Moving Vehicle) sign when

travelling on roads or streets. Comply with all federal, state and local laws.

3. Reduce ground speed when turning and take care that the implement does not strike

obstacles such as trees, fences or buildings.

4. Always disengage PTO before raising the implement to transport position.
5. When raising the mower be sure the PTO driveline does not hit either the mower or

the tractor.

6. During transport the mower should not be lifted over 35-40 cm. from the ground.

O

PERATION

20

olqljb`

H

URRICANE

H40

O

PERATOR

’

S

M

ANUAL

«
...
18
19
20
21
22
...
»

Содержание HURRICANE H40-048









































Отзывы:

Нет отзывов