Rotomec HURRICANE H40-048 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 40

Rotomec HURRICANE H40-048 Скачать руководство пользователя страница 2

Take note! This safety alert symbol found throughout this manual is used to call
your attention to instructions involving your personal safety and the safety of
others. Failure to follow these instructions can result in injury or death.

Signal Words

Note the use of the signal words DANGER, WARNING and CAUTION with the safety
messages. The appropriate signal words for each have been selected using the
following guidelines:

DANGER:

Indicates an imminently hazardous situation that, if not avoided, will result in

death or serious injury.

WARNING:

Indicates a potentially hazardous situation that, if not avoided, could result

in death or serious injury, and includes hazards that are exposed when guards are
removed. It may also be used to alert against unsafe practices.

CAUTION:

Indicates a potentially hazardous situation that, if not avoided, may result in

minor or moderate injury.

SAFETY

This symbol means:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!

«
1
2
3
4
...
»

Содержание HURRICANE H40-048









































Отзывы:

Нет отзывов