Rotomec CYCLONE C50 Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 44

Rotomec CYCLONE C50 Series Скачать руководство пользователя страница 17

10. Checking the tractor tires for the proper pressure in accordance with the tractor

operator's manual.

11. Checking the side discharge chute (on side discharge mowers only) to ensure

that it is properly in place.

12. Checking that the PTO shield, belt shields and all other shielding are on the

machine and securely in place.

13. Making sure the proper attire is worn. Avoiding loose fitting clothing which can

become entangled. Wearing sturdy, tough-soled work shoes and protective
equipment for eyes, hands, ears and head. Never operate tractor or implements
in bare feet, sandals or sneakers.

14. Checking area for stones, branches and other debris that might be thrown.
15. Ensuring proper lighting is available, sunlight or good artificial lighting.

3.07 - Working Speed

The mowing speed depends on ground conditions, tractor HP, mowing height and grass
thickness. Only a test run will enable you to gauge the optimal working speed for your
conditions.

CYCLONE 'C50'

OPERATOR'S MANUAL

SAFETY PRECAUTIONS

17

ROTOMEC

Fig. 6

The mulching kit is

an option available

for the rear discharge

mowers.

This kit, containing

3 multilevel cutting

edge blades and

add-ons containment

baffling which bolts

to the underside of

the mower deck,

mulches and

pulverizes grass

and leaves.

«
...
15
16
17
18
19
...
»

Содержание CYCLONE C50 Series













































Отзывы:

Нет отзывов