Rotomec CYCLONE C50 Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 44

Rotomec CYCLONE C50 Series Скачать руководство пользователя страница 10

You  have  purchased  a  three  spindle  mower  designed  especially  for  the  mowing  of
grassy areas where a highly professional cut is required without wasting time.
This  mower  is  perfect  for  the  maintenance  of  parks,  private  lawns,  industrial  parks,
airports,  hospital  grounds,  schools,  highways,  golf  courses,  sport  complexes,  etc.  The
C50 series, for tractors up to 50 HP, come in working widths of 120, 150, 180 and 210
cm. (4', 5', 6' & 7' respectively). The mower can be either tractor front or rear mounted
and is available in both rear and side discharge

2

. On your mower, the tractor PTO trans-

mits its power through a driveline to a speed multiplier gearbox. A pulley is attached to
the pinion gear shaft of the gearbox which, via high resistance belts, transmits power to
pulleys coupled to the three individual spindle shafts. Blades are secured to these
shafts which turn at a high blade tip speed to cut the grass.
Our C50 grooming mower comes equipped with 4 swivel wheels. Aside from regulating
the cutting height, the wheels are set in such a way as to allow the mower to follow the
contour of the terrain and give a precise, level cut even in undulating conditions.

3.01 - Operational Safety

CAUTION:  our  mowers  are  designed  considering  safety  as  the  most  important
target  and  are  the  safest  available  in  today's  market.  Unfortunately,  human
carelessness  can  override  the  safety  features  built  into  our  machines.  Injury
prevention and work safety, aside from the features on our mowers, is very much
due  to  the  responsible  use  of  the  equipment.  It  must  always  be  operated
prudently following with great care, the safety instructions laid out in this manual.

1. The use of this equipment is subject to certain hazards which cannot be

prevented by mechanical means or product design. All operators of this
equipment must read and understand this entire manual, paying particular
attention to safety and operating instructions, prior to using.

2. Do not operate the tractor and mower when you are tired, sick or when using

medication.

3. Keep all helpers and bystanders at least several meters from a rotary mower.

Only properly trained people should operate this machine.

3 - OPERATION

3 - OPERATION

3 - OPERATION

3 - OPERATION

OPERATOR'S MANUAL

CYCLONE 'C50'

ROTOMEC

10

GENERAL INFORMATION

2

The model C50-210RD is available only in the rear discharge version.

«
...
8
9
10
11
12
...
»

Содержание CYCLONE C50 Series













































Отзывы:

Нет отзывов