Rotolight AEOS, Руководство пользователя

Страница: 7 / 40

BASIC OPERATION MODE (BRI / COL)
(‘BRI’) Brightness
You can adjust the brightness output of AEOS by
rotating the left control knob.
If you rotate the knob quickly it will speed up the
data input. You can press and rotate to adjust the
brightness in steps of 10% (fast mode).
AEOS has a dimming range of 0-100% and is
completely flicker-free at any brightness level,
shutter speed or frame rate.
There is a special mode called ‘True Aperture Dimming’
™
(FDIM) , available in the MENU section, which will display
the brightness as an F-stop, based on your camera
exposure settings – see ‘True Aperture Dimming’
™
.
(page 24)
(‘COL’) Colour
You can adjust and accurately display the colour
temperature (CCT) of AEOS by rotating the right
control knob.
If you rotate the knob quickly it will speed up the
data input. You can press and rotate to deliberately
adjust the colour in steps of 200 kelvin (fast mode).
Simply rotating the knob will adjust the brightness
in steps of 20 kelvin.
AEOS has a colour temperature range of 3150 kelvin
(tungsten) up to 6300 kelvin (reflected daylight sky).
As a bi-colour light, AEOS will be brightest at the
‘mid point; colour, around 4200 kelvin, where both
sets of LEDs are at full power. This also applies in
Flash mode.
Please note that as all LEDs are individually hand
calibrated, the mid point on your unit will vary but
should be around the 4200K. The display will show
a red dot in the right hand corner to indicate the
mid point.
COL
BRI
07