Rotolight AEOS, Руководство пользователя

Страница: 27 / 40

(‘TECH’) Technical Utilities Menu
In the ‘TECH’ sub-menu you can monitor and
adjust a range of technical functions for the AEOS
including checking the battery voltage, setting up a
custom-calibrated colour, monitoring the operating
temperature, viewing the serial number and
firmware version, adjusting the display brightness.
– (‘VOLT’) Voltage
‘VOLT’ mode will scroll display the voltage from
the selected power source (e.g. ’16.4V BATTERY’ or
’15.2V DC IN’). Please note AEOS will automatically
warn you if the voltage drops too low, which
indicates a battery change is needed (e.g. “Low
Battery”). AEOS will also display a blinking dot on
the bottom right of the current display to indicate
low battery voltage while reducing the output by
progressive steps of 10% until voltage stabilises, to
minimise flicker. AEOS will operate from 6V DC up
to 17.5V DC. Only connect external power sources
with the correct polarity and voltage to avoid
serious damage to AEOS.
– (‘CAL’) Calibrated Custom Colour Mode
Click the right knob to enter ‘CAL’ mode. The left
knob controls the yellow channel LEDs and the
right knob controls the blue channel LEDs.
You can now set very specific colours by balancing
the two colour channels within an expanded
colour range from 2800 kelvin to 7200 kelvin.
This custom colour value is held as an operating
preset while you use the AEOS, but will be reset
when you power the unit down.
It is very useful to have access to a colorimeter
(such as a Sekonic C-700 or UPRtek CV600) to
create these custom colours as the resulting
kelvin value is not displayed. Click the left knob
to return to MENU, alternatively you can return to
TECH
VOLT
27
CAL