Rotolight AEOS, Руководство пользователя

Страница: 26 / 40

LOCK
Note: AEOS is always in 2-channel DMX mode (BRI/
COL), i.e the same as Anova PRO 2 ‘FxRx’ 2-channel
mode.
– (‘LOCK’) Settings Lock
Use ‘LOCK’ to isolate and protect a specific light
from changes being made by a master Anova PRO
2 running AUTO.
– (‘MODE’) What Controls AEOS
LOCL’ (the local knobs, trigger input and/or
Skyport) ‘DMX’ for wired DMX or ‘wDMX’ where the
AEOS is wirelessly controlled by Rotolight wDMX
(i.e. from an Anova PRO 2).
– (‘FREQ’) Frequency
Rotate the left knob to scroll to ‘FREQ’ (Skyport
channel). Click the right knob to enter ‘FREQ’
settings, rotate either knob to select your desired
channel (Ch 1-20) and click the right knob to set
and return.
– (‘SKYP’) Skyport
The AEOS will arrive with the Skyport already
activated AEOS will also still flash in Skyport mode
from a wired external source connected to the
flash sync 3.5mm jack port.
MODE = ELSP control modes on Skyport controller.
Within this sub-menu select ‘NORM’ (normal) for
use with other Elinchrom flash units or ‘SPED’
(speed) for Rotolight only units. We recommend
SPED is selected for less data interference. ‘Off’ will
turn the internal Skyport receiver off.
(‘GRP’) Skyport Group
GRP = Skyport Group. Click the right knob to enter
‘GRP’ settings. Rotate either knob to select your
desired group (Gp 1-4). Click either knob to set and
return.
26
M O D E
FREQ
SKYP
GRP