22
OPERATION:
Trailer mounted mixers can be furnished with single tractor controls or dual controls. Dual
controls are standard unless specified.
1. Single controls operate as follows: Spout goes down first - door opens
second. Door closes first - spout goes up second.
2. The disadvantage of the single control is that it does not let you adjust the
spout height without first closing the door.
Drain rain water out of mixer before use.
1” of rain in a 920-18 equals (101 gal) 843 lbs.
of water which will increase the moisture in 1000 lbs. of dry hay (@ 12%) to 52% moisture
or 500 lbs. of dry hay (@ 12%) to 67% moisture.
ROTO-MIX will not warranty bent or broken rotor tubes, bent or broken augers caused from
misuse, wet hay, foreign objects, and/or overloading.
CAUTION: Do not engage the rotor without first starting the augers.
CAUTION: When turning on the rotor, idle the truck (or tractor) down to 1000 RPM or
less.
PREPARING TRACTOR FOR TRAILER MIXER
POSITIONING DRAWBAR
IMPORTANT: Drive components can be damaged from excessive speed. Under no
circumstances should a feed mixer equipped with 540 RPM be operated by
a tractor with 1000 RPM PTO.
Feed mixers are available with either 540 or 1000 RPM driveline. Match tractor PTO with
the feed mixer driveline.
IMPORTANT: To prevent driveline damage, adjust tractor
drawbar to recommended setting. Disengage
tractor PTO before turning.
Remove clevis if equipped when there is a clevis used on the
mixer tongue.
Adjust drawbar length:
PTO SPEED
DIMENSION (A)
540 RPM
14” (256 mm)
1000 RPM (1-3/8” - 21 SPLINE
16” (406 mm)
1000 RPM 91-3/4” - 20 SPLINE
20” (508 mm)
Содержание 920-18
