Roto-Mix 920-18, Руководство по сборке, эксплуатации и запасным частям

Страница: 20 / 97

20
PERFORMING MAINTENANCE (CONT.):
Always use the proper tools or equipment for the job at hand.
Use extreme caution when making adjustments.
Never use our hands to locate hydraulic leaks on attachments. Use a small
piece of cardboard or wood. Hydraulic fluid escaping under pressure can
penetrate the skin.
When disconnecting hydraulic lines, shut off hydraulic supply and relieve all
hydraulic pressure.
Openings in the skin and minor cuts are susceptible to infection from hydraulic
fluid. If injured by escaping hydraulic fluid, see a doctor at once. Gangrene can
result. Without immediate treatment, serious infection and reactions can occur.
Replace all shields and guards after servicing and before moving.
After servicing, be sure all tools, parts and service equipment are removed.
Do not allow grease or oil to build up on any step or platform.
Never replace hex bolts with less than grade five (5) bolts unless otherwise
specified. In some locations a grade 8 fastener may be required, consult your
local Roto-Mix Dealer or Roto-Mix Service Department for more information.
Where replacement parts are necessary for periodic maintenance and servicing,
genuine factory replacement parts must be used to restore your equipment to
original specifications. ROTO-MIX will not claim responsibility for use of
unapproved parts and/or accessories and other damages as a result of their
use.
If equipment has been altered in any way from original design, ROTO-MIX does
not accept any liability for injury or warranty.
A fire extinguisher and first aid kit should be kept readily accessible while
performing maintenance on this mixer/feeder.
SAFETY
READ BEFORE
YOU FEED