Roto-Mix 1355 HDS, Руководство по эксплуатации и запасным частям

Страница: 28 / 69

Page 28
TROUBLE SHOOTING
ALWAYS DISCONNECT OR DISENGAGE POWER TAKE OFF AND
REMOVE KEYS FROM TRACTOR BEFORE CLEANING, ADJUSTING, LUBRICATING
OR SERVICING THIS MACHINE. FAILURE TO FOLLOW THIS RECOMMENDATION
MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
NOTE: THIS CHART DOES NOT COVER ALL PROBLEMS. CONTACT YOUR
DEALERSHIP FOR FURTHER ASSISTANCE.
PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY
Machine Vibration Universal Joints Are Out Of
Alignment. Check And Realign.
Worn Out Bearing. Replace Bearing.
Excessive Bearing Failure Improper Lubrication Refer To Lubrication Chart.
Contamination Check Seal
Excessive Loads. Refer To General
Information About Machine
Loading.
Mixing quality poor, not
thorough. Batch has high concentration
of light weight ingredients
and rotates too fast inside
tub for thorough mixing. Extend restrictor plates
(dogs) further into tub as
instructed on page 20.
High concentration of long
hay, not being torn apart. Extend restrictor plates
(dogs) further into tub as
instructed on page 20.
Hay being added to batch,
but not being incorporated
into mixture. Hay not getting shredded by
mixing action, batch rotating
inside tub too fast. Extend restrictor plates
(dogs) further into tub as
instructed on page 20.
Too much power being
consumed to mix. Restrictor plates extend too
far into tub and retarding
rotation of batch. Move restrictor plates (dogs)
away from tub as instructed
on page 20.